Ctrl+K

Installation Guide

Installation Guide#

Requirements#

  • Make sure to have Python 3.8+ installed (old version 2.x is not supported).

  • It is recommended to create and activate a virtual environment (venv, pipenv, etc.) to avoid conflict with other packages

  • Upgrade PyPI to the latest version

  • Install SPSDK

Warning

Please note that not all SPSDK dependencies might be distributed as wheels (built package format for Python). In this case please ensure that you have C compiler on your system. In some cases rust compiler is also needed

Windows#

To install SPSDK under Windows follow:

python -m venv venv
venv\Scripts\activate
python -m pip install --upgrade pip
pip install spsdk
spsdk --help

SPSDK help for command-line applications should be displayed.

Note

In Windows OS you need to install Microsoft Visual C++ Build Tools

Linux#

To install SPSDK under Linux follow:

python3 -m venv venv
source venv/bin/activate
python -m pip install --upgrade pip
pip install spsdk
spsdk --help

SPSDK help for command-line applications should be displayed.

UART under Linux#

Several steps need to be performed before SPSDK can list and use NXP devices connected to the host PC under Linux using UART.

By default on Ubuntu tty serial devices are only accessible to users in group dialout. The permissions for /dev/ttyACM0 can be permanently solved by adding the user to the dialout group:

sudo usermod -a -G dialout $USER

Then the user has to perform logout and login from the system for the group changes to take effect. Afterward, the UART device could be shown in nxpdevscan and are ready for use.

USB under Linux#

For SPSDK to access connected devices using USB, it is necessary to configure udev rules.

Note

NXP VIDs list - USB - VID & PID.

  1. Create a file for example 50-nxp.rules containing following rules:

SUBSYSTEM=="hidraw", KERNEL=="hidraw*", ATTRS{idVendor}=="0d28", MODE="0666"
SUBSYSTEM=="hidraw", KERNEL=="hidraw*", ATTRS{idVendor}=="1fc9", MODE="0666"
SUBSYSTEM=="hidraw", KERNEL=="hidraw*", ATTRS{idVendor}=="15a2", MODE="0666"

  1. To install rules copy the file to /etc/udev/rules.d:

sudo cp 50-nxp.rules /etc/udev/rules.d

sudo udevadm control --reload-rules

sudo udevadm trigger

  1. Plug your NXP device(s) and call nxpdevscan.

macOS#

To install SPSDK under macOS follow:

python3 -m venv venv
source venv/bin/activate
python -m pip install --upgrade pip
pip install spsdk
spsdk --help

SPSDK help for command-line applications should be displayed.

GitHub#

To install SPSDK form GitHub follow:

$ pip install -U https://github.com/NXPmicro/spsdk/archive/master.zip

GitHub - from sources#

To install SPSDK from source code follow:

$ git clone https://github.com/NXPmicro/spsdk.git
$ cd spsdk
$ pip install -U -e .

Note

In case of problems during installation, please make sure that you have the latest pip version. You can upgrade pip using this command:

pip install --upgrade pip

PyInstaller#

PyInstaller bundles SPSDK applications into executable binaries which might be executed without Python interpreter.

To bundle SPSDK applications into executables run the following line:

$ pyinstaller --clean --noconfirm apps.spec

Note

It is possible to define custom SPSDK_DATA_FOLDER location using environment variable with the name SPSDK_DATA_FOLDER or SPSDK_DATA_FOLDER_version. Where the version is SPSDK version with underscores. SPSDK_DATA_FOLDER_version has priority over SPSDK_DATA_FOLDER. E.g.: SPSDK_DATA_FOLDER_2_0_0

Trust Provisioning#

Extra dependencies must be installed in order to use Trust Provisioning.

Note

On Mac OS you need to install gcc and pcsc-lite (https://pcsclite.apdu.fr/). (brew install pcsc-lite) On Linux you need to install pcscd and libpcsclite-dev. (sudo apt install pcdcs libpcsclite-dev)

$ pip install spsdk[tp]

In case you are installing from local repository.

$ pip install ".[tp]"

This command will install SPSDK with Trust Provisioning support.

DK6 Tools#

The command below install extra dependencies required for DK6 to work.

$ pip install spsdk[dk6]

In case you are installing from local repository.

$ pip install ".[dk6]"

Note

For Pyftdi backend Linux, macOS libusb 1.x is needed. Install it with apt-get install libusb-1.0 or brew install libusb on macOS On Windows install D2XX drivers https://ftdichip.com/drivers/d2xx-drivers/

Contents