Logger

SPSDK implements a logging functionality for intuitive debugging of communication interfaces. All what you need to do is just add line import logging into your code and set logging level to DEBUG or INFO with line logging.basicConfig(level=logging.DEBUG)

from spsdk import mboot
import logging

logging.basicConfig(level=logging.DEBUG)

Terminal output example with logging:

INFO:MBOOT:Connect: USB COMPOSITE DEVICE (0x15A2, 0x0073)
DEBUG:MBOOT:USB:Open Interface
INFO:MBOOT:TX-CMD: ReadMemory(address=0x00000000, length=100, mem_id=0)
DEBUG:MBOOT:TX-PACKET: Tag=ReadMemory, Flags=0x00, p0=0x00000000, p1=0x00000064, p2=0x00000000
DEBUG:MBOOT:USB:OUT[1021]: 01, 00, 20, 00, 03, 00, 00, 03, 00, 00, 00, 00, 64, 00, 00, 00, 00, ...
DEBUG:MBOOT:USB:IN [1021]: 03, 00, 0C, 00, A3, 01, 00, 02, 00, 00, 00, 00, 64, 00, 00, 00, 00, ...
INFO:MBOOT:RX-PACKET: Tag=ReadMemoryResponse, Status=Success, Length=100
DEBUG:MBOOT:USB:IN [1021]: 04, 00, 64, 00, CC, BF, 19, 63, 4B, 69, 48, B3, E1, AF, E6, 79, 72, ...
DEBUG:MBOOT:USB:IN [1021]: 03, 00, 0C, 00, A0, 00, 00, 02, 00, 00, 00, 00, 03, 00, 00, 00, 72, ...
DEBUG:MBOOT:RX-DATA: Tag=GenericResponse, Status=Success, Cmd=ReadMemory
INFO:MBOOT:RX-DATA: Successfully Received 100/100 Bytes
DEBUG:MBOOT:USB:Close Interface